Lpc2000

----- Original Message -----

From: skykotech

To: lpc2000@yahoogroups.com

Sent: Saturday, February 28, 2004 2:26 PM

Subject: [lpc2000] 2214 "simple" board design suggestions

I have about 4 or 5 projects that the LPC2214 would be about a
perfect fit. I have 3 sample 2214 parts, but hopefully can get a few
more down the road. I was wondering if some on this list might
appreciate a cheap, somewhat simple 2214 board, made available at
cost + shipping, and with the schematics and gerbers posted in the
files section. I have the time and desire, and I have routed many 2
and 4 layer boards including a very dense PCI card.

Anyway, if so, what would you want on the board? Just the processor,
regulators (simple linear?) for the 1.8V core and 3.3V IO, and a
crystal, with all other signals brought to .1 inch headers, or
something a bit more exotic, but maybe more usefull?

I am ok with making the board either 2 layers or 4 layers, but if it
is 4 layers, it really screams for doing *something* with the
external address/data bus. I want to try my hand at a compact flash
interface, but I could possibly attach that on a daughterboard at a
later date if that is viewed as an unwanted peripherial.

If you guys are interested, I will take note of your suggestions and
work up a schematic and layout for review.

Thanks!

Rick