Lpc2000

Hi,

The code that you see on the target is as per the Linker Definition File
(LDF or memory map ).
hence each section of the code goes to a defined location as per the
LDF.Youcan get a listing file generated to see the actual generated
mamory address.

( Go to Flash -> Configure Flash tools -> listings tab)

Regards
Andy



On 2/16/06, dodge1955 <sutton@...> wrote:
>
> Can anyone help me figure out why a certain ISP programming is not
> working correctly?
>
> I can compile one of the Keil demo examples (blinky) and upload it
> correctly if it is done through the IDE (Flash, Download) and it works
> fine.  If I manually invoke the Philips Flash Utility and do it
> manually, it does not work.  I have discovered that if I upload the
> hex file thru the IDE and then Download the Flash (which invokes the
> Flash Utility Program) that the code is different than when I look the
> hex file thru an editor.  The blinky.hex code viewed thru an editor
> has code from 0-27B.  When it is uploaded thru the IDE (and works), it
> puts code in 0-7FF and some from 1000-17FF.  Does the IDE have
> specific locations for code that the raw hex file does not have?  Can
> I not generate a raw hex file that can be uploaded directly by the
> Flash Utility Program?  Just trying to understand how it works.  Thanks
>
> Sutton
>
>
>
>
>
>
> SPONSORED LINKS
>   Microcontrollers<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=mfaAujKZXA2Z_vxre9sGnQ>
> Microprocessor<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=9jjd2D3GOLIESVQssLmLsA> Intel
> microprocessors<http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=OMnZuqMZX95mgutt4B-tDw>  Pic
> microcontrollers<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=Malspbd0T4Rq3M4Q0nHrfw>
>  ------------------------------
> YAHOO! GROUPS LINKS
>
>
>    -  Visit your group "lpc2000 <http://groups.yahoo.com/group/lpc2000>"
>    on the web.
>
>    -  To unsubscribe from this group, send an email to:
>     lpc2000-unsubscribe@yahoogroups.com<lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>    -  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>    Service <http://docs.yahoo.com/info/terms/>.
>
>
>  ------------------------------
>



--
Have A Nice Day,
  Anand Pavaskar
  Ph: 91- 9886001512
  Off: 91-51197300 (ext-7053)


[Non-text portions of this message have been removed]