Lpc2000

--- In lpc2000@yahoogroups.com, "Paul Curtis" <plc@...> wrote:
>
> Have you ensured the DBG JTAG jumper is installed (shorted)? 
> 
> --
> Paul Curtis, Rowley Associates Ltd  http://www.rowley.co.uk
> CrossWorks for MSP430, ARM, AVR and now MAXQ processors
> 
> > -----Original Message-----
> > From: punkandsska123 [mailto:jeromerivard@...] 
> > Sent: 24 February 2006 18:18
> > To: lpc2000@yahoogroups.com
> > Subject: [lpc2000] Re: Jtag from k9spud
> > 
> > --- In lpc2000@yahoogroups.com, "punkandsska123" <jeromerivard@> 
> > wrote:
> > >
> > > Hi, I recently made the Jtag board from k9spud and I seem to 
have 
> > some 
> > > problems with it.  I tested the parrallel port with debug and 
it 
> > > works.  When I switch in Rowley Crosstudio and I try to 
connect the 
> > > Wriggler I had a message box that say. 
> > > 
> > > Cannot Identify Target
> > > Check JTAG connection
> > > 
> > > 
> > > What do you think the problem is.
> > > 
> > > Thanks a lot.
> > >
> > 
> > I forgot to says That I use a Olimex Board with a Philips 2148.
> > 
> > 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> > 
> > 
> >
>

Thanks Paul for help me.

The jumper is set and about the #2.


And TDO seems to be ok.

And what is the CPU speed is needed ? 

My dividor is already to one in property.