Lpc2000

Hello,

if you're still having problems (you mentioned issues with CrossLoad, too), it 
would be nice if you could send me a memory dump from flash (address 0x0 to 
0x7ffff) together with the binary you wanted to flash, and maybe even the elf 
file you've built.

OpenOCD should work, I've just verified that I could successfully flash Jim 
Lynch's blinking led example to a LPC2294. After resetting the board, the LED 
started flashing. I would be very interested to find out why it didn't work 
for you.

Regards,

Dominic

On Thursday 23 March 2006 02:39, sixtyfivebit wrote:
> > Why are you looking at RAM addresses if the program is to run out of
> > flash?
> >
> > Or, are you using the RAM demo?
>
> I was flashing the demo2148_blink_flash, but I was unaware I was
> looking in the RAM addresses... Sorry about that. I must have loaded
> the code in the RAM at some point when I was messing with
> ocdcommander, or mayber OpenOCD puts the data in the RAM before
> flashing it. Anyway, I'll look up the flash addresses and check for
> the program there (you can do this right, read back from the flash?)
>
> In that case, please disregard the links...
>
> Thanks for the info Richard. I'll also check out CrossWorks.
>
> Thanks-sixtyfivebit.
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>