Lpc2000

Apologies, I included the wrong gdp.ini file. Correct one attached (the
other was for ocdremote).
Also, I did try the chameleon in wiggler mode (old_amt_wiggler) and did
get it to 'somewhat' work, but it hasn't behaved predictably.

> http://rapidshare.de/files/15816024/ARM_Cross_Development_with_Eclips
> > e_Revision_4_Draft.doc.html
> > 
> > Please understand that this is a rough draft; I giving a 
> peek because 
> > it has information on how to use Dominic Rath's OpenOCD in 
> an Eclipse 
> > environment.
> > 
> > Cheers,
> > Jim Lynch
> 
> Hi Jim,
> 
> Just attempted to get OpenOCD going using the new bits of 
> your tutorial so thought you might like some feedback.
> Any experts on Chameleon with OpenOCD also appreciated (it's not
> working....) !
> 
> 1/ You make no mention of the need to also install the DX22 
> FTDI drivers. According to the OpenOCD wiki you can use 
> --disable-"whatever"
> with openocd but it isn't clear if this is for configure, 
> making or running (my guess is configure ?). Anyway I 
> couldn't seem to get around needing the DLL to use 
> openocd.exe version as specified. Since I didn't actully have 
> an FTDI to plug into a USB port to kick off the recommeded 
> Windows Add-New-Hardware procedure, I simply copied the dll 
> file from the downloaded driver zip to c:\windows. That got 
> rid of that error !
> 
> 2/ I got errors about not being able to find cygwin1.dll, 
> even though c:/cygwin/bin is in my path. I've got around this 
> by running from a cygwin bash shell rather than a DOS prompt. 
> Not sure how I tell Windows the DLL search paths. Have I 
> missed a step somewhere ?
> 
> 2/ I added the ioperm -i to run every time I start debugging. 
> Harmless if already installed. Just one less thing to go 
> wrong/forget. I note that WinARM uses giveio instead to allow 
> user level access, but that was an older openocd version.
>  
> 3/ I wrote my chameleon.cfg file for openocd using Dominic's wiki.
> Unfortunately, the openocd version compiled for cygwin 
> doesn't seem to have some of the options given in the wiki. 
> 'daemon startup' isn't supported, nor the arm7tdmi reset 
> option "run_and_halt". I'll attach the file below for reference.
> 
> 4/ Worst of all, I couldn't actually get the thing to work :( 
>  Just got a JTAG chain error. I tried various JTAG delay 
> settings. Since I'm attempting the Chameleon Accelerator (I 
> believe I do have my port set to EPP mode) , I should 
> possibly also backtrack and try very basic wiggler mode 
> (reprogram the chameleon). I have in the past used this PC 
> with ocdremote and the Chameleon in Raven mode though, but it 
> was a bit dodgy. Suggestions welcome !
> 
> 5/ Just using Insight at this stage. I'll give Eclipse a go 
> when I get the underlying basics all working. My gdb.ini file 
> has been setup as you suggest (plus a heap of other stuff, 
> mainly source paths, I had from before). I'll attach the file 
> below for reference.
> 
> 6/ In the PC BIOS, there is no option to set the parallel 
> port into EPP mode only. There is (EPP and SPP) or (EPP and 
> ECP) and I think one other. Obviously all hysterical. I know 
> you haven't gone into the Chameleon Pod, but it would be good 
> if there was some sort of guide about Parallel Ports 
> somewhere (maybe the Chameleon site ?). Could be useful for 
> plain wiggler people too.
> 
> 
> Cheers,
> Bruce
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 


[Non-text portions of this message have been removed]