Lpc2000

----- Original Message ----- 
From: "jk jlkj" <njad2002@...>
To: <lpc2000@yahoogroups.com>
Sent: Monday, March 27, 2006 7:20 AM
Subject: Re: [lpc2000] JTAG problem


> Is there any method to identify whether the JTAG inputs of LPC have been 
> damaged.

Please don't 'top-post'!

You could write a little program that configures them as inputs, and outputs 
them to another few bits. Load the program using the RS-232 boot facility 
and test the inputs by tying them high and low at the JTAG connector, whilst 
monitoring the outputs. That should work. I didn't bother and just removed 
the chip with some ChipQuik and replaced it - it took me about 30 minutes.

Leon
--
Leon Heller, G1HSM
leon.heller@...
http://www.geocities.com/leon_heller