Lpc2000

Tried that it didn;t work, MEMMAP was equal to 0x....1 I also tried the same function for IAP on the LPC2294 and had no problem at all, and yes it only for sector 0 the whole of sector 0 on the LPC2138. Something I'm missing??

Stanley Frederickson <robostanley@...> wrote:  If the bootloader or RAM are mapped into the interrupt
vector table then you will have problems erasing and
writing to sector 0 (or at least the verification of
the erase and write will fail.)  You can map FLASH
into the interrupt vector by writing a 1 into the
least-significant 2-bits of the MEMMAP register at
address 0xE01FC040.

--- SR <emddjava@...> wrote:
> Does anyone have this problem,. When using the IAP
> set of flash 
> programming commands, sector 0's at 0x00000000 is
> never been able to 
> be programmed when you are running the code on RAM,
> the vector address 
> is mapped onto the internal Flash location
> 0x00000000. Any help, 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

    
---------------------------------
  YAHOO! GROUPS LINKS 

    
    Visit your group "lpc2000" on the web.
    
    To unsubscribe from this group, send an email to:
 lpc2000-unsubscribe@yahoogroups.com
    
    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 

    
---------------------------------
  



		
---------------------------------
New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.

[Non-text portions of this message have been removed]