Lpc2000

--- In lpc2000@yahoogroups.com, Robert Adsett <subscriptions@...> 
wrote:
>
> Quoting jstamos111 <jstamos111@...>:
> > Any thoughts on why I am not seeing any output in hyperterminal?
> >
> > Here is my code which I compiled uvision by keil tools.  I pretty
> > much stole this code from hitex's book for the philips LPC
> > processors.
> >
> > void UART0 (void)
> > {
> > PINSEL0 = 0x05; 	// Select TxD and RxD on pin connect block
> > U0LCR = 0x80;		//Enable programming of divisor 
latches
> >
> > U0DLL = 0xC2;		//Program the divisor latch for 19200 
baud
> > U0DLM = 0x00;
> >
> > U0LCR = 0x33;		//Program the line control 8\N\1
> > U0FCR = 0x4F;		//enable the FIFO's
> >
> > }
> >
> > int main() {
> > 	UART0();
> >
> > 	printf("Hello World\n"); //Call the printf function
> >        while(1) {}
> >        return 0;
> > }
> 
> I don't see any code for connecting printf to the serial port.
> 
> Robert
>

Does writing directly to the uart tx register work? How about putc ?