Lpc2000

topandurangs wrote:

>Hi all,
>
>   I am using LPC2136 IAP and gone through following important 
>sentense, 
>
>1.The IAP routine resides at 0x7FFF FFF0 location and it is thumb
>code.
>
>2.The flash memory is not accessible during a write or erase 
>operation. IAP commands,
>which results in a flash write/erase operation, use 32 bytes of 
>space in the top portion of
>the on-chip RAM for execution.
>
>>From Memory mapped of LPC21XX it shows that at adress 0x7FFF FFF0 
>there is BOOT BLOCK REMAPPED FROM ON-CHIP FLASH MEMORY.
>
>  Is this the same area where IAP routine reside?
>  
>
On the Philips semiconductor website, under Support | Documents, you 
will find this AppNote:

<http://www.standardics.philips.com/support/documents/microcontrollers/pdf/an10256.pdf>http://www.standardics.philips.com/support/documents/microcontrollers/pdf/an10256.pdf

It will explain everything.

TomW


-- 
Tom Walsh - WN3L - Embedded Systems Consultant
http://openhardware.net, http://cyberiansoftware.com
"Windows? No thanks, I have work to do..."
----------------------------------------------------