Lpc2000

I have a problem with capture 0.0 channel in lpc2214. 
There is no interrupt?
What is wrong the following code?

void initTimer0(void)
{
	PINSEL0 |= 0x00000020;
	// setup Timer 0 to count forever
	T0TCR = TCR_RESET;                    // reset &
disable timer 0
	T0PR = T0_PCLK_DIV - 1;               // set the
prescale divider
	T0MCR = 0;                            // disable
match registers
	T0CCR = 0x05;         // capture mode
enabled,risingedge
	T0EMR = 0;                            // disable
external match register
  
  	VICIntSelect &= ~VIC_BIT(VIC_TIMER0);  		//
selected as IRQ
  	VICVectAddr2 = (unsigned long)tc0_isr;  	// set
interrupt vector in 2
	VICVectCntl2 = VIC_ENABLE | VIC_TIMER0; 	// use it
for Timer 0 Interrupt
	VICIntEnable |= VIC_BIT(VIC_TIMER0);    	// Enable
Timer0 Interrupt
	
	T0TC = 0;
	T0CR0 = 0;
	T0TCR = TCR_ENABLE;                   		// enable
timer 0
}

void tc0_isr(void) __irq
{
	if (T0IR & 0x10)
	{
		T0IR = 0x10;
        }
	VICVectAddr = 0;	// Acknowledge Interrupt
}

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com