Lpc2000

I am looking for some code to toggle a pin on the LPC-2119 using the
IAR  KickStart compiler. P1.16 in particular. I have an LED hooked up
and am looking to make it blink. The trouble I'm having is not with C,
but setting up the project and environment. I have code downloading to
a ET_ARM STAMP LPC-2119 by ETT.

I have this code compiling:

/***************************************************************/

#include <IOLPC2119.H>                     // LPC2119 MPU Register

/* pototype  section */
void delay_led(unsigned long int);       // Delay Time Function

int main(void)
{  
   PINSEL2 &= 0xFFFFFFFC;                // Makesure GPIO1.16 = GPIO
Function
   IO1DIR   = 0x00010000;                // Set GPIO1.16 = Output
   IO1SET   = 0x00010000;                // Set GPIO1.16 Output Pin
(OFF LED)

   // Loop Blink LED on GPIO1.16 //
   while(1)                              // Loop Continue
   {
      IO1CLR = 0x00010000;               // Clear Output Pin P1.16 (ON
LED)
      delay_led(1500000);                // Display LED Delay
      IO1SET = 0x00010000;               // Set Output Pin P1.16
(OFF LED)	    
      delay_led(1500000);                // Display LED Delay
   }   
}	  

/******************************************************/
/* Delay Time Function                                                 */
/* 1-4294967296                                                        */
/******************************************************/

void delay_led(unsigned long int count1)
{
   while(count1 > 0)                     // Loop Decrease Counter	
   {
      count1--;
   }
}


Any help would be appreciated.