Yahoo Groups archive

Lpc2000

Index last updated: 2026-04-28 23:31 UTC

Message

Re: [lpc2000] Broken IO Pins?

2006-05-22 by Xtian Xultz

For I2C, the typicall value is 4k7.

Em Seg 22 Mai 2006 09:52, John Stamos escreveu:
> Can someone recommend a good resistor value to use for the pullup resistor?
>
>   Much Thanks.
>
> Robert Adsett <subscriptions@aeolusdevelopment.com> wrote:        At 06:36 
PM 5/20/06 +0000, jstamos111 wrote:
>   >Hey guys,
>   >
>   >This problem has me completely baffled.  Hopefully you can help.
>   >
>   >I have an LPC2106 running on a board of my own design and am using
>   >Keil tools to compile the code.  Here's my very short code:
>   >
>   >void main() {
>   >PINSEL0 &= 0x00000000;
>   >IODIR0 = 0xFFFFFFFF;
>   >IOSET0 = 0xFFFFFFFF;
>   >while(1);
>   >}
>   >
>   >The problems when I run this code all IO ports turn on except P0.2,
>   >P0.3 and P0.26.  Any idea why?  I tried looking in the documentation
>   >but couldn't find anything specific about these ports not working for
>   >IO.  I thought maybe the problem was what I had the pins connected to
>   >(a CPLD) so I made sure to put the connected CPLD pins as inputs and
>   >even disconnected one pin completely and still the same problem.  I
>   >have multiple boards and it does it for at least two of them.
>
>   Well P0.2 & P0.3 are open collector so they'll need pull-ups.  See
>   http://www.open-research.org.uk/ARMuC/LPC2100Tips.html
>
>   P0.26 I don't see anything off hand unless you have JTAG enabled.
>
>   Robert
>
>   " 'Freedom' has no meaning of itself.  There are always restrictions,  
> be they legal, genetic, or physical.  If you don't believe me, try to chew
> a radio signal. "  -- Kelvin Throop, III
>   http://www.aeolusdevelopment.com/
>
>
>
>           SPONSORED LINKS
>                                                         Microcontrollers   
>                                       Microprocessor                       
>                   Intel microprocessors
>
> ---------------------------------
>     YAHOO! GROUPS LINKS
>
>
>     Visit your group "lpc2000" on the web.
>
>     To unsubscribe from this group, send an email to:
>  lpc2000-unsubscribe@yahoogroups.com
>
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
> ---------------------------------
>
>
>
>
>
> ---------------------------------
> Love cheap thrills? Enjoy PC-to-Phone  calls to 30+ countries for just
> 2ยข/min with Yahoo! Messenger with Voice.
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.