Lpc2000

pfavr2 wrote:

>Hi,
>
>I just learned that the example code below shouldn't be put into flash
>- if you still want to use the JTAG that is ;-)
>
>If anyone has a good idea on how I recover my board (i.e. JTAG) I
>would be very grateful. Mabye it can be done without any hardware
>changes or the Philips ISP (as I don't have one)?
>
>  
>
Hold down the P0.14 pin and reset the board.  Continue to hold that pin 
to Ground for about two or three seconds and remove the Ground.  You 
should be able to now use your JTAG.

Holding P0.14 would put you into the ISP (In System Programming) mode 
and will bypass your code entirely.

TomW

-- 
Tom Walsh - WN3L - Embedded Systems Consultant
http://openhardware.net, http://cyberiansoftware.com
"Windows? No thanks, I have work to do..."
----------------------------------------------------