Lpc2000

Have you looked at the Sharp parts.  They have a lot with LCD.

Chris.


>From: Scott Newell <digital.pickle@...>
>Reply-To: lpc2000@yahoogroups.com
>To: lpc2000@yahoogroups.com
>Subject: Re: [lpc2000] Re: the race is on - Str 9xxx vs MCF5282
>Date: Wed, 31 May 2006 22:23:37 -0500
>
>At 08:56 PM 5/31/2006, Eric Engler wrote:
> >--- In lpc2000@yahoogroups.com, Dennis Arkeryd <arkeryd@...> wrote:
> >
> > > (The atmel one that someone suggested seems to lack ethernet that is
> >an absolute requirement for this project.)
> >
> >The Atmel SAM7X has both Ethernet and USB.
> >
> > > The MCF5282 is not arm based, and it lacks usb, but none of these
> >are requirements in our case.
> >
> >This is a powerful MCU that's been around for several years. It's a
> >little old by today's standards but it still competes well.
>
>I've been looking at the Coldifre MCF5329 lately.  It's got 10/100 ethernet
>(no on-chip PHY though), USB host, color LCD controller, CAN, crypto,
>queued SPI, IIC, etc.  240MHz V3 core with MAC and hardware divide.  Sadly,
>no on-chip flash.
>
>I'd prefer an ARM with the magic trio (ethernet, LCD, CAN), but they don't
>seem to be common.
>
>--
>newell
>