Lpc2000

If you have access to the ISP UART it's possible to download and execute
a program in RAM that turns on the secondary JTAG port. The enabling of
the pins appears to survive a reset so this only has to be done on power
up. Some of
our customers are using this with CrossWorks to program the flash and
debug without losing too many IO lines.

Regards
Michael


>   Date: Sun, 18 Apr 2004 20:20:38 -0000
>   From: pontus.oldberg@...
>Subject: Re: Help: Rowley CrossStudio & Wiggler Problem
>
>You shouldn't have any problems at all.
>I am using the Olimex 2106-MT board together with CrossWorks and 
>everything works like a charm.I have tried compiling into all 
>different kind of targets and they all work perfectly. Mind you, i 
>have not messed around with the PLL yet, but i'm getting there.
>
>Did you remove both the DEBUG and BSL jumper ?
>
>The only snag i found was that the control pins to the LCD pins were 
>located on the ETM, so i can not debug my LCD driver. Bummer ;-)
>
>Regards
>/Pontus