Lpc2000

Thanks Doug!!  I've been struggling for days to get it to run, and finally
it does :-))) .  I had overlooked setting "reset asserts hardware reset" .
IAR should really document this better given how popular the 21xx chips are.

- Chris

>
>
> I had similiar problems with IAR,Jlink and the 2106
>
> I found that if you had code in the 2106 flash with the PLL enabled I
> would get similiar problems as above. In order to program the
> flash/debug with Jlink the 2106 flash had to be blank or running code
> without the PLL enabled.
>
> Also make sure in the debugger options for Jlink you have -
>
> 1. philips LPC flash download ticked.
>
> 2. reset asserts hardware reset pin ticked.
>
> In the general options target -
>
> 1. The chip radio button is selected with the lpc2106.i79 file
>
> with all this done and after many days of frustration I'm now happily
> using Jlink to debug
>
> Doug