Lpc2000

Did you ever get your watchdog reset problem resolved?



--- In lpc2000@yahoogroups.com, "bobbruce000" <bobbruce000@y...> 
wrote:
> I stripped the code down to a minimal example.  The assembly
> stub has only two instructions (initialize sp, and jump to
> main()).  Interrupts are not enabled.  On the LPC2106 the
> output pin goes low for a few seconds, toggles for a few
> seconds, and then repeats as the chip is reset by the watchdog.
> On the LPC2124, the cycle only happens once.  Then the chip
> freezes up and requires an external reset.
>