Lpc2000

Just a simple question about the cristal. I know that this MCU (as 
some PICs) has internal PLL. The question is, which is te range of 
External Cristal OSC, and then between what ranges I have to set the 
Internal PLL. I read somewhere, don't remember where, that the 
external cristal should be between 1MHz and 25Mhz, and in the PLL 
Calculator program, there's a maximun of 60Mhz for the clock.
Which is the more recomendable selection, and which one gives more 
performance (higher Bus Clock, Higher MCU clock...and so on).
Thanks for the patience...
Ezequiel

--- In lpc2000@yahoogroups.com, "Leon Heller" <leon_heller@h...> 
wrote:
> ----- Original Message ----- 
> From: "acetoel" <acetoel@y...>
> To: <lpc2000@yahoogroups.com>
> Sent: Thursday, August 26, 2004 2:09 PM
> Subject: [lpc2000] Re: Newbie with LPC2106 - Please help
> 
> 
> > Well...I will try to make my own board, because importing things
> > from other country is very expensive here in Argentina. I will 
make
> > the JTAG (parallel port) Interfase, to program it. Does the 
LPC2000
> > comes with a "boot" programmed (as some micros has), or it's 
empty
> > as a stand alone microcontroller?
> > Today Fedex will bring my the micros, so I will start doing this
> > this night.
> 
> Have a look at my web page. I've provided the Gerber and drill 
files for a
> simple PCB I designed. I've put a design for the JTAG interface in 
the Group
> Files area.
> 
> Leon
> --
> Leon Heller, G1HSM
> http://www.geocities.com/leon_heller