Lpc2000

Thanks, but it is not in ECP mode.

--- In lpc2000@yahoogroups.com, "lynchzilla" <lynchzilla@a...> wrote:
> Buried in the Macraigor web site's FAQ is the following important 
> advice:
> 
> "What mode must my parallel port be in?
> 
> As far as the parallel port is concerned, a Wiggler is a simple uni-
> directional device. It will work with the parallel port in any mode 
> EXCEPT "ECP". It will NOT work in ECP mode at all.
> 
> Remember, the mode is set in the CMOS bios of your computer."
> 
> Boot your desktop PC and get it into "setup" mode. On my computer, 
> you hit the DEL key just as it boots up to do this. Make sure that 
> the parallel port is NOT in ECP mode (the default for modern PCs). I 
> found that ECP mode gave me the "cable disconnected" message.
> 
> Good luck.
> Jim Lynch