Lpc2000

I started on a LPC2124 with 10MHz xtal, and none of the newlib-lpc
examples picking up the right baud rate. (of course after adjusting
SetNativeSpeed). 

Then I tried the UT040803A  example, no luck on 10MHz. Then I throw in
a 14.7456MHz xtal, and the UT040803A is working OK now. But the
newlib-lpc examples still not picking up the right baud rate. This is
how it's configured:

	SetNativeSpeed(14746uL);
	sp.baud   = 115200uL;
	sp.length = UART_WORD_LEN_8;
	sp.parity = UART_PARITY_NONE;
	sp.stop   = UART_STOP_BITS_1;
	SetMAM( 3u, MAM_full_enable);
	VPBControl(VPB_DIV1);
	SetDesiredSpeed(60000uL);

Is there any obvious reason why this is not working? (lpc_hello_rs232
from WinARM)?

Gabe