Lpc2000

Do you have the latest bootloader software loadsed on the chip, as 
described in the errata sheet?


--- In lpc2000@yahoogroups.com, "bobbruce000" <bobbruce000@y...> 
wrote:
> 
> I am trying to program an LPC2114 using the ISP
> routines.  Everything goes fine until I issue the
> command to copy the bytes from RAM to Flash.
> There is a long delay (maybe 30 seconds), and then
> I get a return code of "215\r\n".  But, according to
> the User Manual, the only valid return codes are
> 0 to 19.
> 
> After programming, the chip does not boot or go into
> the Philips bootloader.  So I assume that means the
> write was partially successful, so the vector checksum
> is okay, but the rest of the write was not completed.
> 
> If anyone know what the 215 return code means,
> please let me know.
> 
>      -bob