Lpc2000

Hi,

Try this link below. I have just done this myself. I came up with the
following number and was able to communicate on the workbench. I have still
do some more studing about this very important subject.

CANBitrate250k_60MHz          0x001D0007

http://www.esacademy.com/faq/calc/sja1000.htm


  -----Original Message-----
  From: Gus [mailto:gus_is_working@...]
  Sent: Friday, 12 November 2004 1:05 AM
  To: lpc2000@yahoogroups.com
  Subject: [lpc2000] Re: CAN Timing and BTR



  Peter,

  Here is a link to a free CAN baud rate calculator. It is made for
  Microchip products but you can use the graphs to figure out what are
  the possible baud rates and all other can-bits parameters.

  http://www.intrepidcs.com/mcp2510/


  Gus
  --- In lpc2000@yahoogroups.com, "peterburdine" <lordofdawn@h...>
  wrote:
  >
  > Does anyone have a good way to generate the timings for the CAN
  bus?
  > I've tried to do some of the math by hand, but I can't seem to ever
  > get it right.
  >
  > What I'm looking for is 125k/s @ 60MHZ, 125k/s @ 48MHz and 1M/s @
  60 MHz.
  >
  > Thanks for any help you can give.
  >
  > --Peter




        Yahoo! Groups Sponsor

        Get unlimited calls to

        U.S./Canada




----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/lpc2000/

    b.. To unsubscribe from this group, send an email to:
    lpc2000-unsubscribe@yahoogroups.com

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




[Non-text portions of this message have been removed]