Lpc2000

Yes, I noticed the data sheet was blank. I also looked a little closer
and saw that it wasn't all of the outputs that were slow. The problem
pin is po.16. po.17->19 are fast (10ns).

Maybe my part is broken.

--- In lpc2000@yahoogroups.com, "Leon Heller" <leon_heller@h...> wrote:
> 
> 
> >From: "dsidlauskas1" <dsidlauskas@w...>
> >Reply-To: lpc2000@yahoogroups.com
> >To: lpc2000@yahoogroups.com
> >Subject: [lpc2000] GPIO Rise Times
> >Date: Tue, 14 Dec 2004 02:30:18 -0000
> >
> >
> >
> >I just received the KickStart board from IAR and I'm running a little
> >program that toggles some output pins (blinky). Looking at then port
> >pins with a scope I see rise and fall time of 15 microseconds. Do I
> >have a broken part or what?
> 
> They are left blank in the LPC210x data sheet, so they could be
anything! 
> 8-)
> 
> Leon