Lpc2000

Hi
We had exactly the same problem using the J-Link.
What version of the philips bootloader is in the target device? 
Updating the bootloader in my development board to the latest 
provided by Philips made all the difference. Worked like a charm 
after that...

Without the update, programming would fail if the device already 
contained code that had enabled the PLL.

Hope this helps
Simon

--- In lpc2000@yahoogroups.com, "Dan Beadle" <dan.beadle@i...> wrote:
>  
> 
> I recently was working a similar problem with IAR JLink and Keil 
MPC2100
> board.
> 
>  
> 
> I set IAR JLink clock parameter to 12 Mhz, debug Verify Flash ON.