Lpc2000

----- Original Message ----- 
From: "bclapper29" <clapper@...>
To: <lpc2100@yahoogroups.com>
Sent: Wednesday, January 07, 2004 1:09 AM
Subject: [lpc2100] Re: trouble programming our prototype board w/ lpc210x
ISP


> --- In lpc2100@yahoogroups.com, Robert Adsett <subscriptions@a...>
> wrote:
> > At 09:43 AM 1/4/04 +0000, you wrote:
>
> ... snip ....
>
> > > Hyperterminal should work.
> > >
> > >Leon
> >
> > Hyperterminal does work, I've used it myself.  I went has far as
> reading
> > version numbers to test the communications and it's fairly
> straightforward.
> >
> > Robert
>
> As noted, Hyperterminal does work. I find it peculiar that I can
> connect with Hyperterminal but I get a serial synchronization error
> with both FLASHLPC and LPC210x ISP tools.   Maybe I'll have to write
> each sector myself with Hyperterminal! :-0
>
> I've toyed with all the baud rate and packet size settings. If anyone
> has any other tools that I might try. I'd greatly appreciate it.

Realterm is a lot better than Hyperterminal for this sort of thing:

http://realterm.sourceforge.net/

Leon
--
Leon Heller, G1HSM
Email: aqzf13@...
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html