Lpc2000

Dear embeddedjanitor,

Please, open your eyes and have a look to www.ramtron.com. You will see, that many
of their FRAMs now have not any write/read cycles limiting!

Varuzhan

  ----- Original Message ----- 
  From: embeddedjanitor 
  To: lpc2000@yahoogroups.com 
  Sent: Tuesday, February 01, 2005 8:25 AM
  Subject: [lpc2000] Re: Using flash memory instead of eeprom?



  AFAIK FRAM does not have unlimited life. It was around 10^6 cycles 
  when I forst looked at it many years back and I believe it is now 
  around 10^12 cycles, compared to around 10^5 cycles for EEPROM and 
  flash.

  The smallprint though is that for EEPROM and flash, the endurance 
  counts only the write cycles and not read cycles whereas FRAM 
  endurance counts both.

  Because it is "just like RAM" once might be tempted to try place 
  variables in FRAM or data items that you read frequently (data as 
  well as code). In this case you could hit that 10^12 cycles pretty 
  fast. With worst case code on an LPCxxx style device you could end up 
  hitting the FRAM for more than 10^7 cycles per second, giving only a 
  useful life of 10^5 seconds or just over a day.

  As always, design with your eyes open!




  --- In lpc2000@yahoogroups.com, Robert Wood <robert.wood@a...> wrote:
  > Serial FRAM is available and not too outrageously priced now. Not 
  as cheap as 
  > EEPROM, but if your project isn't cost sensitive it works a treat 
  and you 
  > have unlimited life non-volatile memory.
  > 
  > --------------------------------------------------------------
  > 
  > There are many serial flash devices (I Use SST25vf512)that guarantee
  > 100K cycles and 100 years.  Flash offers byte write and sector 
  erase,
  > while EEPROM offers both byte write and erase but are SLOW.
  > 
  > Richard
  > 
  > --- In lpc2000@yahoogroups.com, "gewitter2000" <martin@c...> wrote:
  > > 
  > > Hi!
  > > 
  > > Has someone used the flash memory of the lpc21xx for eeprom 
  purposes?
  > > Or is it more usefull to take an additive eeprom to the design? I 
  only
  > > want to store some parameters.
  > > 
  > > Thank you for feedback!
  > > Martin
  > 
  > 
  > 
  > 
  > 
  >  
  > Yahoo! Groups Links





------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/lpc2000/
      
    b.. To unsubscribe from this group, send an email to:
    lpc2000-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]