Lpc2000

My PINSEL settings are bogus.


--- In lpc2000@yahoogroups.com, "Richard" <richas@y...> wrote:
> 
> Perhaps someone can clue me into the missing detail here.  I am trying
> to get a match output pin to toggle on the LPC2138.  Here is the jist
> of the code:
> 
>   PINSEL0 |= 0x0A000000;      //enable Match pins 1.0 and 1.1
>   PINSEL0 &= 0xF5FFFFFF;
> 
>   PINSEL1 |= 0x40;            //enable match 1.2
>   PINSEL1 &= 0xFFFFFF7F;
> 
>   T1IR = 0xFF;
>   T1TCR = 0x2; /* Reset timer 1 */
>   T1TC = 0;
>   
>   T1CTCR = 0x0;
>   T1PR = 1; /* Set the timer 1 prescale counter */
> 
>   T1MCR = 0x2;      /* reset TC on MR0 */
>   T1EMR = 0x3F0;    //enable match toggle outputs
>   
>   T1MR0 = 0x70000; /* Set timer 1 match register */
>   T1TCR = 1;   /* Start timer 1 */
> 
> I can get an interrupt on a match, but Icannot get a pin to toggle.
> 
> Richard