Lpc2000

Thank you for the link.  I did discover one problem--I was sending 
a 'run' command instead of a 'continue' command to get things 
started.  Apparently you need to use 'continue' with remote embedded 
targets.  This gem of info was found on a German site--thank god for 
Google language translation.  As for my setup, I was using eclipse 
but the JTAG-gdb error codes are very general.  The command windows 
are just being used until I can work out the low level bugs in my 
setup.  It seems strange that so little info is available on the 
wiggler-ocdcommander-gdb setup.  Isn't this a very common hardware 
setup?  Anyway, I'm guessing lots of people must be having the same 
problems I'm having so I plan to post a step-by-step when I get 
things working.

--- In lpc2000@yahoogroups.com, "Richard" <nospam@F...> wrote:
> 
> <snip>
> 
> >Obviously I'm missing something but I can't figure out what.  
Please 
> > forgive me if this is one of those RTFM moments.
> > Thanks in advance.
> 
> 
> I have some instructions on using the prebuilt tools for Win32:
> 
> http://www.freertos.org/portlpc2106.html
> 
> This might provide some help - not the same setup as you but could 
> provide some clues.  I used Insight (GDB GUI) rather than straight 
> GDB.
> 
> Regards.