Lpc2000

--- In lpc2000@yahoogroups.com, "Stephen Pelc" <stephen@m...> wrote:
> > What's NOT mentioned is that it does not work if you're running
> > the CPU at "normal" speed, 60 MHz.
> > 
> > The code would end up all over the place - in the Abort or Undef
> > handler or way off at memory position 0x800xxxx. Also, the Setup
> > for Erase/Write calls would take 50-100 mS to complete.
> 
> Are you using the latest boot loader software? If it is before 
> v1.6x (AFAIR), you will have these problems. I can't speak for 
> the 2129, but we had identical issues with the 2106 eighteen 
> months ago. With the current bootloader you just have to disable 
> interrupts around the call.
> 
No, I have the latest 1.6, and I did not have any interrups enabled, 
it was run directly at powerup.
Seems to work fine at 12 MHz, so I just disable the PLL while 
programming.

/Jesper