Lpc2000

I used in one pressure transducer prototype the EM Marin LCD module, 
similar to this one:

http://www.emmicroelectronic.com/Products.asp?IdProduct=221

it has simple serial interface, low power, small size.... best fit for 
simple transducer.

Marko

acetoel wrote:

>
> I have used KS0108 Based LCD, which are monocrome but 128x64, I
> would like to use a bigger screen. Anyway, take in consideration
> that most LCD needs 5V, and you may need a bi direction level
> converter...
>
> See you
> Ezequiel
>
> --- In lpc2000@yahoogroups.com, "dsidlauskas1" <dsidlauskas@w...>
> wrote:
> >
> > I have a project that is using a 2138, and I would like to add a
> > Qvga(320X240) monochrome 1 bir per pixel graphic screen to do
> mostly
> > text and some simple graphics like boxes, and maybe a moving wait
> bar.
> > Cost is a big factor.
> >
> > I'd appreciate any suggestions regarding graphic panels,
> controllers
> > and design approaches.
> >
> > Many thanks in advance.
> >
> > Dave S.
>
>
>
>
> *Yahoo! Groups Links*
>
>     * To visit your group on the web, go to:
>       http://groups.yahoo.com/group/lpc2000/
>        
>     * To unsubscribe from this group, send an email to:
>       lpc2000-unsubscribe@yahoogroups.com
>       <mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>        
>     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>