Lpc2000

Where do you get these, and how much do they cost?  

Do you use the backlight version?


--- In lpc2000@yahoogroups.com, "Marko Pavlin (home)" <mp@h...> wrote:
> I used in one pressure transducer prototype the EM Marin LCD module, 
> similar to this one:
> 
> http://www.emmicroelectronic.com/Products.asp?IdProduct=221
> 
> it has simple serial interface, low power, small size.... best fit for 
> simple transducer.
> 
> Marko
> 
> acetoel wrote:
> 
> >
> > I have used KS0108 Based LCD, which are monocrome but 128x64, I
> > would like to use a bigger screen. Anyway, take in consideration
> > that most LCD needs 5V, and you may need a bi direction level
> > converter...
> >
> > See you
> > Ezequiel
> >
> > --- In lpc2000@yahoogroups.com, "dsidlauskas1" <dsidlauskas@w...>
> > wrote:
> > >
> > > I have a project that is using a 2138, and I would like to add a
> > > Qvga(320X240) monochrome 1 bir per pixel graphic screen to do
> > mostly
> > > text and some simple graphics like boxes, and maybe a moving wait
> > bar.
> > > Cost is a big factor.
> > >
> > > I'd appreciate any suggestions regarding graphic panels,
> > controllers
> > > and design approaches.
> > >
> > > Many thanks in advance.
> > >
> > > Dave S.
> >
> >
> >
> >
> > *Yahoo! Groups Links*
> >
> >     * To visit your group on the web, go to:
> >       http://groups.yahoo.com/group/lpc2000/
> >        
> >     * To unsubscribe from this group, send an email to:
> >       lpc2000-unsubscribe@yahoogroups.com
> >       <mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> >        
> >     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> >       Service <http://docs.yahoo.com/info/terms/>.
> >
> >