Lpc2000

Hi Joe,

  Let me know if you need anymore. I just checked our stock for 2138
and we have 400 in stock with 400 more coming. I can also send you two
samples if Arrow has problems getting more (free!).

regards,
Charles

--- In lpc2000@yahoogroups.com, "Joe" <nospam1234@y...> wrote:
> 
> The 2129 requires 1.8V, and is in production.
> I have received 2 samples of the 2138 from Arrow and they are trying
> to get me 2 more.
> 
> and my stock check at Arrow at 10:11am 4-13-05 shows
> "Philips  	LPC2132FBD64-S  	$7.49  	Qty:1,914
> Philips  	LPC2138FBD64-S Call For Quote.1-877-237-8621"
> 
> So the 2132 is in stock, the 2138 samples are available in limited
> quantity.
> 
> Joe
> 
> 
> 
> Order Online 	
> --- In lpc2000@yahoogroups.com, "charlesgrenz" <charles.grenz@s...>
wrote:
> > 
> > Hi Joe,
> > 
> >   The 2138 does not have a 1.8V input. Only 3.3V is needed to run the
> > 2138.
> > 
> >   You can get samples and buy units from Arrow Electronics. They have
> > around 2K in stock.
> > 
> > regards,
> > Charles
> > 
> > 
> > --- In lpc2000@yahoogroups.com, "Joe" <nospam1234@y...> wrote:
> > > 
> > > Bump
> > > 
> > > My timing was a little off before ;-)
> > > I now have over half the layout done, and have jumper options for
> > > the 2129/2138.
> > > 
> > > I repeat my plea
> > > 
> > > IS THERE ANY CHANCE OF AT LEAST POSTING A PRELIMINARY
> > > (SUBJECT TO CHANGE)
> > > PIN DIFFERENCE BETWEEN THE LPC213x/LPC214x.
> > > 
> > > If Slide7.jpg in the file section is correct and  the 214x with
USB is
> > > to be sampling in  "H1 '05" you must have some idea of how the
pinout
> > > will be affected ;-)
> > > 
> > > It would also be nice to know when the LPC2138 will be available in
> > > production, the layout includes a 1.8V regulator and both CAN and
> > > secondary I2C processor to processor communications hardware,
because
> > > I can not presently order 2138 from distribution.
> > > 
> > > Thanks in advance
> > > 
> > > Joe Bougher
> > > Bioanalytical Systems Inc.
> > > 2701 Kent Av. 
> > > West Lafayette IN 47906
> > > (765) 463-4527
> > > 
> > > 
> > > --- In lpc2000@yahoogroups.com, "Joe" <nospam1234@y...> wrote:
> > > > 
> > > > Philips-Apps 
> > > > 
> > > >  I know Philips does not like to post information before the
product
> > > > is real. 
> > > >  
> > > >  However I have to do a PCB layout in the next week or 2 of a
> > > LPC2138
> > > > and would REALLY like to anticipate changing over to the LPC2148
> > > when
> > > > it is available.  
> > > > 
> > > >  Is there any chance of at least posting a preliminary (subject to
> > > > change) pin difference between the LPC213x/LPC214x.
> > > > 
> > > >  I am currently using USBN9604 on the SPI port for USB, and it is
> > > slow
> > > > and inefficient.
> > > > 
> > > > Thank in advance.
> > > > 
> > > > Joe