Lpc2000

Hi

when you need a JTAG tool with Debugger, GNU compiler and examples 
fitting to LPC2100 and the existing LPC2100 baords than it seams that 
the Hitex tool chain is apropriate to get a fast entry with the 
possibility to upgrade to professional tools.

http://www.hitex.com/perm/arm_toolchain.html

Regards
Klaus

--- In lpc2100@yahoogroups.com, "georgelpowell" <georgelpowell@y...> 
wrote:
> Hi Brian
> 
> I am looking like you for a good platform. I am familiar with the 
> Atmel JTag ATmega128 IDE platform-nice and the Microchip MPlab IDE-
> nice too, but I do not know what to expect with an LPC21xx platform.
> 
> If you find what you are looking for could you let me know. If I 
see 
> something nice I will return the favor.
> 
> regards
> 
> George Powell
> ID-Innovations
> RFID
> 
> 
> --- In lpc2100@yahoogroups.com, "Brian C. Lane" <brian@s...> wrote:
> > I need to get some inexpensive development tools/hardware to make 
> sure 
> > the LPC1xx is suitable for our needs. After digging about it 
looks 
> like 
> > I should be able to get by with the ARM-JTAG and LPC-P1 from 
Olimex 
> for 
> > hardware, and the GNU tools from 
> http://www.ocdemon.com/OCDemonWindows.html
> > 
> > Using this will I be able to debug source? I saw one post in the 
> archive 
> > that seemed to indicate that you could only debug in assembly?
> > 
> > Does anyone see any obvious problems with these choices? Other 
> suggestions?
> > 
> > Thanks,
> > 
> > Brian
> > 
> > -- 
> > -----------------------------------------------------
> > Brian C. Lane (W7BCL)                      Programmer
> > www.shinemicro.com   RF, DSP & Microcontroller Design