Lpc2000

----- Original Message ----- 
From: "Alaric B Snell" <alaric@...>
To: <lpc2100@yahoogroups.com>
Sent: Friday, January 30, 2004 4:28 PM
Subject: Re: [lpc2100] LPC-M216 DIL module PCBs


> leon_heller wrote:
> > I've just received 10 PCBs for Eduardo's LPC-M216 DIL module from
> > PCB-Pool.
> >
> > I've uploaded a pic of the front and back to the Files area: module.jpg
>
> Sweet, I'm looking at making something similar myself. Are those extra
> holes I see for a JTAG interface header in the middle of the thing?

Yes, that's right.

I was designing something like it as well, until Eduardo did this. I have
reservations about his decoupling capacitors, the one for the I/O supply is
a long way
from the chip. I'd have put them on the underside, as close to the chip as
possible.

Have a look at his docs for the schematic, etc.

I'll design a simple home-made PCB to take the module and a 3.3 V regulator,
plus an LED,
RS-232 transceiver, etc.

>
> Ok, ok, I could follow the traces from the image and look up the pinout
> of the chip, but that would be *effort* ;-)
>
> For mine, I plan to bring out just the serial link, reset, and the line
> that is used to invoke the ROM bootloader - no need for complex
> debuggery, since I'll run FORTH on it and debug via the serial link
anyway.

I was thinking of porting a Forth to it, as well. 8-)

>
> > I'll be sending one to Eduardo and only want a couple for myself. If
> > anyone is interested in buying one or two of the remainder, please get
> > in touch. Price will be 16 Euros each, including air-mail postage.
>
> Tempatation, temptation... you're in the UK, aren't you? What's that in
> pounds with mere first class postage? :-)

My invoice from PCB-Pool was in Euros and I worked the price out from that.
Say 10 pounds. PayPal would be quickest.

Regards,

Leon
--
Leon Heller, G1HSM
Email: aqzf13@...
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html