Lpc2000

--- In lpc2000@yahoogroups.com, Robert Adsett <subscriptions@a...> 
wrote:
> At 07:13 PM 6/15/05 +0000, Josh Ferguson wrote:
> >So far I've successfully loaded and run the two example (blinky and
> >Hello) programs specifically written for the lpc22xx board.  I've 
now
> >moved onto the CAN examples.  The one I'm specifically trying to 
get
> >to work is CANBlinky.  It compiles and I can put it on the board
> >without problems and it appears to be running (the LED is blinking)
> >but I'm getting nothing from CAN2 which is supposed to be
> >transmitting A/D data.  Are there any gotchas when I try to run 
these
> >CAN examples on the 2294 board?
> 
> 
> First question.  What else is hooked up to your CAN bus?
> 
> Robert
> 

I have a PEAK CAN to USB connector connected to my laptop and I'm 
running the software that came with that connector that simply 
listens to the CAN and shows the packets or can send packets manually 
back to the device.