Lpc2000

Oh, you can transmit a 0 ok, it's just that the PC may strip NULs (0's) 
from the input stream. It just comes back down to what software you are 
using to receive. But since I don't know what you are using I can't help. :)

BTW, try transmiting 0's from the PC back to the PC to test that end. 
Elimination is the 1st part of debugging.

*Peter*

soren_t_hansen wrote:

>Hi everybody
>
>I want to transmit a number og bytes on UART1 and some of them are 0.
>When I receive the bytes on the PC, all the 0s are gone, resulting in
>an error on that side. 
>
>I use the following to transmit the bytes:
>
>while (!(U1LSR & 0x20));
>   U1THR = buffer[i];
>
>Isn't possible to transmit a 0?
>
>Best Regards
>S\ufffdren
>