You must not read the VIC registers in the register window. This kills the breakpoints :-( Gerhard Keith Wentworth wrote: > Using the LPC2131 AND LPC2138: > I have been experiencing a problem when running in RAM or ROM with the jlink debugger. Sometimes no interrupts will work at all. All I have to do is unplug the debugger and power from my board. PLug them back in and start over. > > I am not sure what is the root cause. IAR is looking in to it. >
Message
Re: [lpc2000] Timer interrupt when executing from RAM
2005-06-30 by Gerhard Kammerer