Lpc2000

--- In lpc2000@yahoogroups.com, "gerhard_uttenthaler" 
<gerhard.uttenthaler@g...> wrote:
> Hello!
> 
> I am working on a project using the LPC2119.
> 
> My main loop observes, whether a message has been received by the 
CAN
> interrupt and if so, sends it on the other CAN channel.
> 
> Now, if i put a:
> 
> // wait for free UART
> while( (UART1_LSR & 0x60) == 0x00){;}
> // send a character
> UART1_THR = 0x32;
> 
> into this main loop and have a heavy CAN load on one channel the
> programm gets locked up after some period of time and the (external)
> watchdog triggers a reboot.
> 
> Without the UART accesses the programm works just fine.
> 
> Does anyone has any idea about that?
> 
> Thank you!
> 
> Gerhard

I am having an almost identical type of problem using the LPC2119.  
Its in previous posts and I have since been told by Phillips that if 
I was using IAR to contact IAR for this issue.  Not much in the way 
of details other then to the finger to the IAR compiler/debugger.

I am waiting to hear from IAR now but its a big issue since I cannot 
seem to predict this erratic behavior.  Are you currently using IAR?  
Might help rule out the compiler or not...

PS If you do find the reason I wouldn't mind knowing since I am going 
around in circles with this issue myself.