Yahoo Groups archive

Lpc2000

Index last updated: 2026-04-28 23:31 UTC

Message

Re: LPC2138, VGA, and SD/MMC

2005-07-27 by alexmotin

See there CF: http://www.compactflash.org/
http://focus.ti.com/lit/an/spra803/spra803.pdf - it is very simple 
instruction it s for DSP? but i think it's same for LPC


--- In lpc2000@yahoogroups.com, "Sebastien Jacquemard" 
<sejacquemard@w...> wrote:
> Hi, I'm actually designing my card to connect a qvga display. I 
use an epson
> controller S1D13706 with built in ram. The problem is this 
controller has an
> external bus interface and you need a lpc22xx to use it (16 data 
line, 16
> adress line + some control line.
> I connect also an sd card to it on the SPI bus.
> IGo to the keil web site, www.keil.com , there is an sdcard on the 
new
> mcb2140 eval board, you can download the schematics.
> Search "Ingo Busker" from google. He has made sdcard port for the 
LPC2106
> with FAT16. You can download the source file from his web site.
> 
> Regards,
> Sebastien
> 
> 
> 
> ----- Original Message -----
> From: "achargis" <jdarling@e...>
> To: <lpc2000@yahoogroups.com>
> Sent: Tuesday, July 26, 2005 7:48 PM
> Subject: [lpc2000] LPC2138, VGA, and SD/MMC
> 
> 
> > Has anyone actually managed to use a standard VGA or SVGA 
monitor with
> > the LPC2138?  I've googled myself to death and can't find much 
on the
> > processor let alone the processor and VGA.
> >
> > I've also looked at uVGA witch is a viable solution to my 
problem, but
> > if it can be done in the processor itself it would be nice.  I've
> > found source and schematics for hooking up other ARM7's but they 
have
> > a built in TFT driver that makes this possiable.
> >
> > Also I'd like to add an SD/MMC reader to my board so I can load
> > external graphics (JPEG and BMP).  Basically I'm trying to build 
a
> > digital picture frame.  CF Card would be more ideal, but I'm 
sure that
> > its also more difficult to implement.
> >
> > I tried searching the group first, so hopefully my eyes didn't 
miss
> > answers to either question.  This is my first project with ARM 
so I'm
> > also learning the ins and outs and oops.
> >
> > Jeremy
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.