Lpc2000

Kris,
   See the previous post(s).  ;-)

Richard

--- In lpc2100@yahoogroups.com, "microbit" <microbit@c...> wrote:
> Hi Andreas,
> 
> Interesting !
> I have the V1.0.2 (from lpc2100.com).
> I'll hunt for that new version.
> RTS puzzles me though, are you sure it's not CTS ??
> RTS is an output from MCU to Host (when DTE).
> I wish they'd have used DTR for P0.14 ... :-)
> 
> B rgds
> Kris
> 
> 
> > Hi Kris,
> >
> > it seems that Philips are using the DTR for a reset and RTS for 
P0.14
> > in the new Version of LPC2000 Flash Utility (V2.0.3).
> >
> > Andreas
> >
> >
> > --- In lpc2100@yahoogroups.com, "microbit" <microbit@c...> wrote:
> > > Hi John,
> > >
> > > That sounds great, I think we're all on a similar wavelength 
here.
> > > I've been wanting to get a gap to investigate whether the 
Philips ISP
> > > utility asserts/deasserts DTR or CTS, so that it can be routed 
to P0.14,
> > > so the bootloader entry is automatically done when you start 
the ISP
> > > utility and reset the board. (it takes 30 seconds with the DRO, 
and
> > for some
> > > reason
> > > I haven't done it yet :-(
> > > If it doesn't do that, maybe Philips might consider doing 
something
> > to that
> > > effect.
> > >
> > > What do you think ?
> > >
> > > -- Kris
> > >
> > > ----- Original Message -----
> > > From: "J.C. Wren" <jcwren@j...>
> > > To: <lpc2100@yahoogroups.com>
> > > Sent: Friday, February 06, 2004 3:11 AM
> > > Subject: [lpc2100] Evaluation/development board features?
> > >
> > >
> > > >     I'm thinking of laying out a board for the LPC210x.  I 
don't need
> > > > much to get started, but if I'm going to put the effort into 
it, I may
> > > > as well attempt to make it useful to other people.  Features 
I'm
> > > > thinking of:
> > > >
> > > >     MMC slot (SPI)
> > > >     MCP23016 16 bit port expander (I2C, perhaps two of these)
> > > >     64K bit FRAM memory (I2C)
> > > >     PCF8563 RTC (I2C)
> > > >     A/D converter (I2C) (unspec'ed.  8 channels, 10 bits?)
> > > >     RESET, INT0, INT1, INT2 pushy buttons
> > > >     DS18B20 temperature sensor (1-wire)
> > > >     DS2411 silicon ID (1-wire)
> > > >     DS2405 addressable switch (1-wire)
> > > >     JTAG interface (both ports, Wiggler compatible)
> > > >     UART0 MAX232 (or equivalent) level shifter, DB-9
> > > >     UART1 MAX232 (or equvalent) level shifter, all control 
lines, DB-9
> > > >     7-30V AC/DC input, 2.1mm coaxial (possibly switcher, 
probably
> > linear)
> > > >
> > > >     1st MCP23016 would include 8 LEDs and 8 switches (rocker 
or
> > pushy?)
> > > >     2nd MCP2306 would be uncommitted, but have standard 14 
pin LCD
> > > > connector.
> > > >     LCD bias would be 0-5V, settable via a pot (or 1-wire 
digipot?)
> > > >     I2C and SPI availabel on headers
> > > >     5V @ 500ma, 3.3V @ 100ma available for user
> > > >     All I/O pins brought out to headers
> > > >     All I/O pins disconnectable from devices on board via 
jumper
> > headers
> > > >     Prototyping area?  (I prefer to use connectors, rather 
than
> > munging
> > > > up cards)
> > > >
> > > >     Anything I missed?  Anything any absolutely must have?
> > > >
> > > >     --jc
> > > >
> > > >       Yahoo! Groups Sponsor
> > > >             ADVERTISEMENT
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > ------------------------------------------------------------------
--------
> > > ------
> > > > Yahoo! Groups Links
> > > >
> > > >   a.. To visit your group on the web, go to:
> > > >   http://groups.yahoo.com/group/lpc2100/
> > > >
> > > >   b.. To unsubscribe from this group, send an email to:
> > > >   lpc2100-unsubscribe@yahoogroups.com
> > > >
> > > >   c.. Your use of Yahoo! Groups is subject to the Yahoo! 
Terms of
> > Service.
> > > >
> > > >
> >
> >
> >       Yahoo! Groups Sponsor
> >             ADVERTISEMENT
> >
> >
> >
> >
> >
> > ------------------------------------------------------------------
--------
> ------
> > Yahoo! Groups Links
> >
> >   a.. To visit your group on the web, go to:
> >   http://groups.yahoo.com/group/lpc2100/
> >
> >   b.. To unsubscribe from this group, send an email to:
> >   lpc2100-unsubscribe@yahoogroups.com
> >
> >   c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.
> >
> >