Lpc2000

--- In lpc2000@yahoogroups.com, "soren_t_hansen" <soren_t_hansen@y...>
wrote:
> Hi there
> 
> I'm trying to send data from the pc to the lpc2132 through a Jtag
> interface and would like to handle the interrupts from CommRx and
> CommTx. Unfortunately it seems as if the ISR's aren't called. I have
> the following setup of ISR's:
> 
> void DccCommunicator::init ()
> {
>   VICVectAddr1 = (unsigned long) COMMTx;
>   VICVectAddr2 = (unsigned long) COMMRx;
>   //bit 5 = 1 => enabled this IRQ slot
>   //4-0 = 0x02 => interrupt 2 = COMMTx 
>   VICVectCntl1 = 0x00000022;
>   VICVectCntl2 = 0x00000023;
>   //Enable interrupt for COMMTx and COMMRx
>   VICIntEnable |= 0x000000C;
>   initialized = true;
> }
> 
> In the ISR I set a static bool to true, but this newer happenes,
> indicating that the ISR newer gets called.
> 
> Have anyone had any experinence with CommRx and CommTx?
> 
> Best Regards
> Søren

Dough!!! 
Now I see that the VICVectCntl1 and VICVectCntl2 should be switched ...

(To my defence, I must say that it isn't my code ... but it doesn't
help, does it?)

/Søren