Lpc2000

Hi,
 
           part is ok and I read IOPIN0 high with keil enviornment
 
 Tom

relentless_6995 <bobd@...> wrote:
--- In lpc2000@yahoogroups.com, "y4krys" <krys.brukalo@a...> wrote:
That's okay - even though it is an "output only" apparently you 
still must set it as such with the IODIR0 register - if you don't it 
appears not to behave as an output. BUT I STILL haven't solved this 
behavior: the high order bit of IOPIN0 never seems to read HI.

> Sorry, I should have checked.  P0.31 is an output only.
> Krys
> 
> --- In lpc2000@yahoogroups.com, "relentless_6995" <bobd@c...> 
wrote:
> > LPC2138 with IAR environment
> > 
> > ---
> > volatile unsigned long ul0;
> > 
> >         // interrupts are disabled at this point to be sure
> >         // they are not cause of problem 
> > 
> >       IOCLR0 = 0x80000000;      // gpio_RFMODEM_RESET_P0_31_o;
> >       ul0 = IOPIN0;      
> >       
> >       IOSET0 = 0x80000000;      // gpio_RFMODEM_RESET_P0_31_o;
> >       ul0 = IOPIN0;      
> >       
> > 
> > ... function goes on
> > ---
> > 
> > THE PROBLEM IS THE HIGH ORDER BIT IN ul0 IS NEVER SET AFTER 
READING 
> > IOPIN0 - THE HIGH ORDER BIT DOES NOT REFLECT THE ACTUAL P0.31 
> OUTPUT 
> > LEVEL THAT I SEE ON THE SCOPE - it always remains low while the 
> > p0.31 output changes accordingly
> > 
> > Tried on two sets of hardware ... it doesn't get any simpler ... 
> > maybe I've been staring too long. Is there a problem in the part?
> > Anybody?
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> >       
> > }




---------------------------------
YAHOO! GROUPS LINKS 


    Visit your group "lpc2000" on the web.
  
    To unsubscribe from this group, send an email to:
 lpc2000-unsubscribe@yahoogroups.com
  
    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


---------------------------------



		
---------------------------------
Yahoo! for Good
 Click here to donate to the Hurricane Katrina relief effort. 

[Non-text portions of this message have been removed]