Lpc2000

Hi,
I am looking for an open source RTOS for Keil MCB2130
(LPC2138) board with TCP/IP. This board does not have
Ethernet. I want to use a Bluetooth (PPP over  serial
Bluetooth) or WLAN(GPIO interface) with LPC2138.

Has anybody tried it?

Please give your suggestions. Thanks.

Regards,
Balaji

--- Dan Beadle <dan.beadle@...>
wrote:

> Thanks.  
> 
>  
> 
> This will make FreeRTOS easy for those of us using
> IAR
> 
>  
> 
>   _____  
> 
> From: lpc2000@yahoogroups.com
> [mailto:lpc2000@yahoogroups.com] On Behalf
> Of FreeRTOS Info
> Sent: Friday, September 23, 2005 8:53 AM
> To: lpc2000@yahoogroups.com
> Subject: Re: [lpc2000] Re: LPC2138 and FreeRTOS
> 
>  
> 
> > Go to www.freertos.org <http://www.freertos.org/>
> .  Richard has a
> wide
> > variety of ports, including the Keil MB2100 board.
>  I am trying to get
> > him to post the IAR port to the LPC (there is
> difference in the way
> the
> > assembly language is done between Keil and IAR -
> Keil has a better asm
> > macro).  Comments to him will help.
> >
> 
> 
> Dan,
> 
> I've just uploaded FreeRTOS V3.2.2.  This adds a
> supported IAR LPC2129
> port.
> Converting to an LPC2138 should not be a problem.
> 
> Regards,
> Richard.
> 
> 
> http://www.FreeRTOS.org
> 
> 
> 
> 
> >
> >
> > Freertos is supported on everything from PIC to
> LPC to PC.
> >
> >
> >
> > Dan
> >
> >
> >
> >
> >
> >   _____
> >
> > From: lpc2000@yahoogroups.com
> [mailto:lpc2000@yahoogroups.com] On
> Behalf
> > Of lehighuboy
> > Sent: Friday, September 16, 2005 8:54 AM
> > To: lpc2000@yahoogroups.com
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > Where can I get a copy of the Keil port of the
> rtos?
> >
> > Thanks, Garrett
> >
> > --- In lpc2000@yahoogroups.com, "Dan Beadle"
> <dan.beadle@i...> wrote:
> > > Thanks for pointing this out.  The credentials
> were temporarily
> > disabled.
> > > You should be able to get in now.  The link
> should be
> > >
> > > ftp::/ftp.inclinesoftworks.com if using IE, or
> just
> > ftp.inclinesoftworks.com
> > > <ftp://ftp.inclinesoftworks.com/>  if using
> ftp.com <ftp://ftp.com/>
> > > command line
> > >
> > >
> > >
> > > Dan
> > >
> > >
> > >
> > >   _____
> > >
> > > From: lpc2000@yahoogroups.com
> [mailto:lpc2000@yahoogroups.com] On
> > Behalf Of
> > > Rock Dubois
> > > Sent: Thursday, September 15, 2005 8:30 PM
> > > To: lpc2000@yahoogroups.com
> > > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Dan,
> > >
> > > I tried to download it from your ftp site but it
> didn't let me in.
> > I tried
> > > again but still not able to login.
> > >
> > > Yvon.
> > >
> > >
> > > Dan Beadle <dan.beadle@i...> wrote:
> > > I have just posted FreeRTOS Version 3.20 for
> IAR/ARM on my website
> > > ftp://inclinesoftworks.com
> <ftp://inclinesoftworks.com/>    Use
> > UserName
> > > incline9_cust and pw freertos.
> > >
> > >
> > >
> > > This version of FreeRTOS has been adapted to
> IAR/ARM. (Using Version
> > > 4.30a of WARM).  It works with MCB2100 Eval
> Board.  It is adapted
> > from
> > > the Keil and SAM versions of the RTOS.
> > >
> > >
> > >
> > > If you have questions, you can contact me..
> > >
> > > Dan Beadle
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >   _____
> > >
> > > From: lpc2000@yahoogroups.com
> [mailto:lpc2000@yahoogroups.com] On
> > Behalf
> > > Of charlesgrenz
> > > Sent: Wednesday, August 24, 2005 3:39 PM
> > > To: lpc2000@yahoogroups.com
> > > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi Dan,
> > >
> > >   Did you find the port from gcc to IAR
> difficult? I am using IAR
> > and
> > > I was looking at the LPC2106 gcc version and
> porting that to the IAR
> > > 2106.
> > >
> > > Thanks,
> > > Charles
> > >
> > >
> > >
> > > --- In lpc2000@yahoogroups.com, "Dan Beadle"
> <dan.beadle@i...>
> > wrote:
> > > > I did an early port of this to the IAR tool
> chain.  It took a
> > while to
> > > > get my mind around all the files, but, in
> truth, it is quite
> > small and
> > > > easy to work with.  The documentation is only
> available online.  I
> > > would
> > > > prefer a PDF to a web page, but that is a nit.
> > > >
> > > >
> > > >
> > > > I am using FreeRTOS on several projects.  I
> like the following
> > > features:
> 
=== message truncated ===


Dream is just a dream.  A goal is a dream with a plan and a deadline.
- Harvey Mackay