Lpc2000

----- Original Message ----- 
From: "gustavo_sagasti" <gustavo_sagasti@...>
To: <lpc2100@yahoogroups.com>
Sent: Saturday, February 07, 2004 11:08 PM
Subject: [lpc2100] Wiggler


> Hi:
>
> I have a Wiggler from Macraigor that came with a Triscend (8051
> embedded + FPGA) SCoC Dev Kit.
> Does someone know if it would be compatible (may be configuring an
> internal jumper...) with Crosswork (from Rowley) or Keil Debugger?

Are you sure it was a Triscend 8051? They also do an ARM system, which comes
with a Wiggler, IIRC. Or, perhaps they have JTAG on the 8051, also. I think
Triscend was recently bought by ARM, BTW.

It will probably be OK. The other Wiggler versions (they all have the same
basic PCB) are for PowerPC etc. You could just try it and see if it works.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@...
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html