Lpc2000

Hi,

for uCLinux you don't need a MMU. Also you don't need 2 MB of program
storage but at the very least 512 KB and lots of RAM, much more than
64 KB. 

While you need a little less resources than stated in the e-mail
before, the result stays the same, you can not run uCLinux on a
LPC2106.  A good choice within the LPC family would be any of the
LPC2200-series which have an external bus. 

Bob

--- In lpc2000@yahoogroups.com, Boris Estudiez <boris_tormentor@y...>
wrote:
> 01/10/2005 - 12:30 
> 
> AFAIK, You need >2MB program storage so Flash-based MCUs are out,
> also is necessary a MMU (Memory Management Unit).
> The Atmel AT91R40008 is a very popular device for running uCLinux.
> 
> There is a project that support uCLinux for ARM-7 based devices
> without MMU, look here:
> http://opensrc.sec.samsung.com/profile.html
> 
> Now I have other question: 
> Is it possible to port uCLinux on LPC22xx devices with 
> extern Flash/SRAM memory connected ?.
> 
> Regards,
> Boris Estudiez.-
> 
> -- 
> 
> Contacteme en:
> * Mail(1): stk@f...
> * Mail(2): 43824@e...
> * Mail(3): slicetex@h...
> * Website: http://stk.freeshell.org
> EOF
> 
> 
> On 30/09/2005 at 22:30:01 -0700 ranjith kumar Wrote:
> > Hi All.,
> >  
> > I am Ranjith , working as a Design Engineer in GDA Technologies
Ltd., Chennai.
> > Now I am working in Philips LPC2106 ( ARM7TDMI ) microcontroller
based project.
> >  
> > I would like know that ' Is it possible to port uCLinux in LPC2106
? '.
> >  
> >  
> > And also inform me What is minimum Memory requirement to port uCLinux?
> >  
> > Expecting your Reply....
> >  
> >  
> > Thanks & Regards
> > Ranjithkumar M.