Lpc2000

Hi Peter

I also has this problem not only with the Philips flash software.
We soved this by overriding the settings in the windows device manager.
So f.e. com8 became com2 and vice versa.

Cheers
Michael


>From: Peter Jakacki <peterjak@...>
>Reply-To: lpc2000@yahoogroups.com
>To: lpc2000@yahoogroups.com
>Subject: [lpc2000] LPC2000 Flash Utility Coms Ports > 5
>Date: Thu, 13 Oct 2005 17:34:45 +1000
>
>I'm using CP2102 USB to UART bridges in my designs and I am able to
>communicate very nicely with these devices. On some of my systems I
>already have 4 coms ports + internal modem = COM1-COM5. When I plug in
>my usb coms the pc creates coms ports above this from COM6 onwards.
>
>By changing the ini file in TeraTerm I can get it to access ports other
>than the default COM1-COM4 and that all works fine.
>
>The problem is when I go to upload new firmware with the LPC2000 Flash
>Utility, it only runs up to COM5 and there is no way of changing it.
>
>At present I am forced to switch across to a laptop that doesn't have
>any built in coms ports and is quite happy to have usb coms installed
>from COM1-COM5.
>
>Philips, can you please upgrade this utility to handle ports above COM5
>for us coms port rich folks.
>
>TIA,
>*Peter*
>