Res:LPC2106 Programming - ISP - Solved
2004-02-21 by gokbektas
I retouched with the soldering iron to pins of baby, compare function
or ISP utility confirms chip is programmed.
Leon, your code sent garbage characters at 9600 baud, I tried other
baud rates also...
Then I recompiled uart example of crossworks then loaded to
chip...
It is working! Now, I can play ;-)
Thanks a lot! I'll upload my board's picture to my personal website
soon.
Show quoted textHide quoted text
----- \ufffdzg\ufffdn \ufffdleti -----
Kimden : lpc2000@yahoogroups.com
Kime : lpc2000@yahoogroups.com
G\ufffdnderme tarihi : 21/02/2004 12:57
Konu : Re: Re: [lpc2000] LPC2106 Programming - ISP and hex file
----- Original Message ----- From: "gokbektas" <gokbektas@...> To: <lpc2000@yahoogroups.com> Sent: Saturday, February 21, 2004 10:18 AM Subject: Ynt: Re: [lpc2000] LPC2106 Programming - ISP and hex file > Thanks leon, > I tried the hex file that you sent me. > > I read 4293984050 part ID and 1.3 bootloader ID, when I click Upload to Flash, it > does not give any error messages, a progress bar shows it is uploading. > > When I click Compere Flash, a progress bar shows it is reading but "File compare Fail" > message appears at the end. > > And there is no data coming from chip when I check it with terminal window... It looks like you have a problem with the flash memory. I'd replace the chip, or try another board if you have one. I'm actually using a '2104, but it shouldn't make any difference. Regards, Leon Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/lpc2000/ <*> To unsubscribe from this group, send an email to: lpc2000-unsubscribe@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/