Yahoo Groups archive
Thread
2006-04-22 by topandurangs
Hi all,
I am using LPC2000 flash download utility ver2.2.3.In the
utility user selectable baud rates are given.When i set baud <= 38400
my flash downloading happens properly.When i have set baud rate above
38400,utility given communication error.
Is this problem with my target board or anything else.
How should i communicate above 38400 baud rate.
Thanks in advance.
Regards,
Pandurang S.2006-04-22 by Martin Maurer
Hello,
what crystal are you using on your board ?
Regards,
Martin
----- Original Message ----- From: "topandurangs" <pandurang@...> To: <lpc2000@yahoogroups.com> Sent: Saturday, April 22, 2006 11:05 AM Subject: [lpc2000] LPC2000 flash downloader baud rate > Hi all, > > I am using LPC2000 flash download utility ver2.2.3.In the > utility user selectable baud rates are given.When i set baud <= 38400 > my flash downloading happens properly.When i have set baud rate above > 38400,utility given communication error. > Is this problem with my target board or anything else. > How should i communicate above 38400 baud rate. > Thanks in advance. > > > Regards, > > Pandurang S. > > > > > > > > > > > Yahoo! Groups Links > > > > > > > >
2006-04-22 by Pandurang Shinde
hi,
I am using 12MHZ crystal.
Regards,
Pandurang S.
________________________________From: lpc2000@yahoogroups.com on behalf of Martin Maurer
Sent: Sat 4/22/2006 3:05 PM
To: lpc2000@yahoogroups.com
Subject: Re: [lpc2000] LPC2000 flash downloader baud rate
Hello,
what crystal are you using on your board ?
Regards,
Martin
----- Original Message -----
From: "topandurangs" <pandurang@...>
To: <lpc2000@yahoogroups.com>
Sent: Saturday, April 22, 2006 11:05 AM
Subject: [lpc2000] LPC2000 flash downloader baud rate
> Hi all,
>
> I am using LPC2000 flash download utility ver2.2.3.In the
> utility user selectable baud rates are given.When i set baud <= 38400
> my flash downloading happens properly.When i have set baud rate above
> 38400,utility given communication error.
> Is this problem with my target board or anything else.
> How should i communicate above 38400 baud rate.
> Thanks in advance.
>
>
> Regards,
>
> Pandurang S.
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
________________________________
YAHOO! GROUPS LINKS
* Visit your group "lpc2000 <http://groups.yahoo.com/group/lpc2000> " on the web.
* To unsubscribe from this group, send an email to:
lpc2000-unsubscribe@yahoogroups.com <mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
________________________________
[Non-text portions of this message have been removed]2006-04-22 by jayasooriah
--- In lpc2000@yahoogroups.com, "Pandurang Shinde" <pandurang@...> wrote: > I am using 12MHZ crystal. If you look at the ISP baudrate vs crystal frequence table in the user manual under the "set baud rate" command description, you will see that with 12.288MHz crystal, maximum baud rate is 38400 which is what you observed. Jaya
2006-04-23 by Pandurang Shinde
Hi all, thank you very much,i have look in to the manual & got the answer. Regards, Pandurang S. ________________________________
From: lpc2000@yahoogroups.com on behalf of jayasooriah Sent: Sat 4/22/2006 8:05 PM To: lpc2000@yahoogroups.com Subject: [lpc2000] Re: LPC2000 flash downloader baud rate --- In lpc2000@yahoogroups.com, "Pandurang Shinde" <pandurang@...> wrote: > I am using 12MHZ crystal. If you look at the ISP baudrate vs crystal frequence table in the user manual under the "set baud rate" command description, you will see that with 12.288MHz crystal, maximum baud rate is 38400 which is what you observed. Jaya SPONSORED LINKS Microcontrollers <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&c=3&s=69&.sig=c-HXthtbZy4TZbI3ib0PMg> Microprocessor <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&c=3&s=69&.sig=ijt0SspWtjogcHCuFD0lUQ> Intel microprocessors <http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&c=3&s=69&.sig=WOZdpklkgHbXR5quAgrl5w> ________________________________ YAHOO! GROUPS LINKS * Visit your group "lpc2000 <http://groups.yahoo.com/group/lpc2000> " on the web. * To unsubscribe from this group, send an email to: lpc2000-unsubscribe@yahoogroups.com <mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . ________________________________ [Non-text portions of this message have been removed]