Lpc2000

Hi all,

Anyone that can recommend a good, low cost eval board
for LPC2119/LPC2129, (or a similar 64 pin part).
I don't want to design my own HW just yet, as it requires a fair
bit of RF layout integration :-)
Ideally this board will be able to take the parts with memory protect
(when they become available).
Must have standard JTAG IDC on it.

Any ideas ?
A google brings up nothing to write home about.

-- Kris

> Anyone that can recommend a good, low cost eval board
> for LPC2119/LPC2129, (or a similar 64 pin part).

Good ? I don't know, but Keil has one: http://www.keil.com/mcb2100/

Regards,

         Martin

Thanks Martin,

had a look, of course has the usual "get a quote" crap.
Nowadays "inexpensive" still seems to put you out by $300-$400
for something you'll only need for a bit, and then joins the endless
stack of other boards that gather dust .. :-(

Tnx for the reply.
Being Keil, I expect it to be priced ridiculously, but I'll get a quote from
disty.

Thanks Martin.
-- Kris

----- Original Message -----
From: <capiman@...>
To: <lpc2000@yahoogroups.com>
Sent: Monday, April 19, 2004 6:07 AM
Subject: Re: [lpc2000] LPC2119/29 low cost eval board


> > Anyone that can recommend a good, low cost eval board
> > for LPC2119/LPC2129, (or a similar 64 pin part).
>
> Good ? I don't know, but Keil has one: http://www.keil.com/mcb2100/
>
> Regards,
>
>          Martin
>
>
> --------------------------------------------------------------------------
------

> Yahoo! Groups Links
>
>   a.. To visit your group on the web, go to:
>   http://groups.yahoo.com/group/lpc2000/
>
>   b.. To unsubscribe from this group, send an email to:
>   lpc2000-unsubscribe@yahoogroups.com
>
>   c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>

Asked in January for the price and they told me 100 Euro + Tax + Shipping.

Regards,

         Martin

----- Original Message ----- 
From: "microbit" <microbit@...>
To: <lpc2000@yahoogroups.com>
Sent: Sunday, April 18, 2004 10:13 PM
Subject: Re: [lpc2000] LPC2119/29 low cost eval board


> Thanks Martin,
>
> had a look, of course has the usual "get a quote" crap.
> Nowadays "inexpensive" still seems to put you out by $300-$400
> for something you'll only need for a bit, and then joins the endless
> stack of other boards that gather dust .. :-(
>
> Tnx for the reply.
> Being Keil, I expect it to be priced ridiculously, but I'll get a quote
from
> disty.
>
> Thanks Martin.
> -- Kris
>
> ----- Original Message -----
> From: <capiman@...>
> To: <lpc2000@yahoogroups.com>
> Sent: Monday, April 19, 2004 6:07 AM
> Subject: Re: [lpc2000] LPC2119/29 low cost eval board
>
>
> > > Anyone that can recommend a good, low cost eval board
> > > for LPC2119/LPC2129, (or a similar 64 pin part).
> >
> > Good ? I don't know, but Keil has one: http://www.keil.com/mcb2100/
> >
> > Regards,
> >
> >          Martin
> >
> >
>
> --------------------------------------------------------------------------
> ------
> > Yahoo! Groups Links
> >
> >   a.. To visit your group on the web, go to:
> >   http://groups.yahoo.com/group/lpc2000/
> >
> >   b.. To unsubscribe from this group, send an email to:
> >   lpc2000-unsubscribe@yahoogroups.com
> >
> >   c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.

> >
> >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>

--- In lpc2000@yahoogroups.com, capiman@t... wrote:
> > Anyone that can recommend a good, low cost eval board
> > for LPC2119/LPC2129, (or a similar 64 pin part).
> 
> Good ? I don't know, but Keil has one: http://www.keil.com/mcb2100/

Keil quoted me $149 USD but didn't have any in stock.  They said 
they're made in Europe (Germany I believe?) so they might be a bit 
cheaper there.

Also, the Philips website has a decent list of eval boards--some of 
which are being sold direct by Philips with prices listed and can be 
ordered online.

Given all the problems I'm having with my current 
Olimex/Wiggler/Rowley set up, I'm about ready to get out my credit 
card for some better hardware.

> Keil quoted me $149 USD but didn't have any in stock.  They said
> they're made in Europe (Germany I believe?) so they might be a bit
> cheaper there.
>
> Also, the Philips website has a decent list of eval boards--some of
> which are being sold direct by Philips with prices listed and can be
> ordered online.
>
> Given all the problems I'm having with my current
> Olimex/Wiggler/Rowley set up, I'm about ready to get out my credit
> card for some better hardware.

Thanks, I didn't look at the Philips website, because it has/had only eval
boards that come with "eval" versions of complete tools ie. Ashling, IAR
etc.
I _just_ want a low cost board !
I will look again, maybe that's changed.

Incidentally, I am using a Nohau LPC2106 tester board which surely would
have to be designated "better" hardware.
I'm quite sure that different HW will not solve your problem.
It's a marginal timing issue in CW it seems, but where/what exactly, dunno.

I'll either buy the Keil board, or directly go to my own integrated HW as a
"proto-prototype". I have a complete RF transceiver system that mates with
the LPC2129, hence the reason why I wanted to eval first what the best
choice
is of I/O control lines for the transceiver section, rather than immediately
lay out a complex RF PCB... !

Cheers,
Kris

Hi Kris,
We offer a range of foot print/programming adapters for our EVBA7 board
which supports any of the 64 and 144 pin parts. Price/details available at:
http://www.ashling.com/support/lpc2000/eval_kits.html
 
 



Hugh @ http://www.ashling.com/support/lpc2000/ 

-----Original Message-----
From: microbit [mailto:microbit@...] 
Sent: 18 April 2004 21:01
To: lpc2000@yahoogroups.com
Subject: [***SPAM*** Score/Req: 06.28/05.00] [lpc2000] LPC2119/29 low cost
eval board


Hi all,

Anyone that can recommend a good, low cost eval board
for LPC2119/LPC2129, (or a similar 64 pin part).
I don't want to design my own HW just yet, as it requires a fair
bit of RF layout integration :-)
Ideally this board will be able to take the parts with memory protect
(when they become available).
Must have standard JTAG IDC on it.

Any ideas ?
A google brings up nothing to write home about.

-- Kris



  _____  

Yahoo! Groups Links


*	To visit your group on the web, go to:
http://groups.yahoo.com/group/lpc2000/
  

*	To unsubscribe from this group, send an email to:
lpc2000-unsubscribe@yahoogroups.com
<mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
  

*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

Thanks Hugh,

I will look into this and compare.

----- Original Message -----
From: "Hugh O'Keeffe" <hugh.okeeffe@...>
To: <lpc2000@yahoogroups.com>
Sent: Monday, April 19, 2004 7:05 PM
Subject: RE: [lpc2000] LPC2119/29 low cost eval board


> Hi Kris,
> We offer a range of foot print/programming adapters for our EVBA7 board
> which supports any of the 64 and 144 pin parts. Price/details available
at:

> http://www.ashling.com/support/lpc2000/eval_kits.html
>
>
>
>
>
> Hugh @ http://www.ashling.com/support/lpc2000/

Hi Kris,
LPC2129 board is available from Pasat - TinyARM DIP50. It includes voltage regulator,
5V to 3.3V and 1.8V, Reset controller, 10MHz quartz and it is housed in DIP50 with all
I/O pins present on the connector. Included is IAR EWARM 16kbyte limited.
Order directly from Pasat or from distributors, e.g. using credit card from www.burntec.com.
Regards,
Belo


--- In lpc2000@yahoogroups.com, "microbit" <microbit@c...> wrote:

> Hi all,
> 
> Anyone that can recommend a good, low cost eval board
> for LPC2119/LPC2129, (or a similar 64 pin part).
> I don't want to design my own HW just yet, as it requires a fair
> bit of RF layout integration :-)
> Ideally this board will be able to take the parts with memory protect
> (when they become available).
> Must have standard JTAG IDC on it.
> 
> Any ideas ?
> A google brings up nothing to write home about.
> 
> -- Kris