Lpc2000

Dear Srs,

We are experimenting the ISP downloading using the LPC2142 using the 
Philips Flash Utility 2.2.1 on our board.
When we hit the "Read Device" bottom of the utility we got the 
following message "TYPE NOT SUPPORTED" even receiving the ID number and 
the Version Loader 2.1.of the micro controller.
It seens to me that it is not a hardware problem because the 
TX,RX,reset and P0.14 are identical of the Keil Demo board.
(the demo board uses the LPC2148)
Does anybody has a idea of what's going on?

Regards,
Jan

The latest version of the software can be found at 
www.philips.com/microcontrollers

The new version is 2.2.2. This version supports 214x.

Amit

--- In lpc2000@yahoogroups.com, "janduchateau" <jan@p...> wrote:
> Dear Srs,
> 
> We are experimenting the ISP downloading using the LPC2142 using 
the 
> Philips Flash Utility 2.2.1 on our board.
> When we hit the "Read Device" bottom of the utility we got the 
> following message "TYPE NOT SUPPORTED" even receiving the ID number 
and 

> the Version Loader 2.1.of the micro controller.
> It seens to me that it is not a hardware problem because the 
> TX,RX,reset and P0.14 are identical of the Keil Demo board.
> (the demo board uses the LPC2148)
> Does anybody has a idea of what's going on?
> 
> Regards,
> Jan

amit,
 
can you help me with how can i enter isp mode for lpc2106
 
i am using lpc flash utility v2.2.1
 
when i press "read device id" it gives the message "cannot communicate with the demo board"
 
please reply soon 
 
regards
vicky

Amit <emailakb@...> wrote:
The latest version of the software can be found at 
www.philips.com/microcontrollers

The new version is 2.2.2. This version supports 214x.

Amit

--- In lpc2000@yahoogroups.com, "janduchateau" <jan@p...> wrote:
> Dear Srs,
> 
> We are experimenting the ISP downloading using the LPC2142 using 
the 
> Philips Flash Utility 2.2.1 on our board.
> When we hit the "Read Device" bottom of the utility we got the 
> following message "TYPE NOT SUPPORTED" even receiving the ID number 
and 
> the Version Loader 2.1.of the micro controller.
> It seens to me that it is not a hardware problem because the 
> TX,RX,reset and P0.14 are identical of the Keil Demo board.
> (the demo board uses the LPC2148)
> Does anybody has a idea of what's going on?
> 
> Regards,
> Jan




---------------------------------
YAHOO! GROUPS LINKS 


    Visit your group "lpc2000" on the web.
  
    To unsubscribe from this group, send an email to:
 lpc2000-unsubscribe@yahoogroups.com
  
    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


---------------------------------



		
---------------------------------
 Yahoo! India Matrimony: Find your partner now.

[Non-text portions of this message have been removed]

Hello,

use a speed of 9600 for beginning and put the jumper to ISP (at least if it 
is the same as the LPC2138 board).
If this is working you can increase speed, up to i think, 38400 (this is 
because a 12 MHz oscillator is used on the board).

Regards,

        Martin

----- Original Message ----- 

From: "vicky gosar" <vickygosar@...>
To: <lpc2000@yahoogroups.com>
Sent: Sunday, September 18, 2005 2:17 PM
Subject: Re: [lpc2000] Re: LPC2000 Flash Utility


> amit,
>
> can you help me with how can i enter isp mode for lpc2106
>
> i am using lpc flash utility v2.2.1
>
> when i press "read device id" it gives the message "cannot communicate 
> with the demo board"
>
> please reply soon
>
> regards
> vicky
>
> Amit <emailakb@...> wrote:
> The latest version of the software can be found at
> www.philips.com/microcontrollers
>
> The new version is 2.2.2. This version supports 214x.
>
> Amit
>
> --- In lpc2000@yahoogroups.com, "janduchateau" <jan@p...> wrote:
>> Dear Srs,
>>
>> We are experimenting the ISP downloading using the LPC2142 using
> the
>> Philips Flash Utility 2.2.1 on our board.
>> When we hit the "Read Device" bottom of the utility we got the
>> following message "TYPE NOT SUPPORTED" even receiving the ID number
> and
>> the Version Loader 2.1.of the micro controller.
>> It seens to me that it is not a hardware problem because the
>> TX,RX,reset and P0.14 are identical of the Keil Demo board.
>> (the demo board uses the LPC2148)
>> Does anybody has a idea of what's going on?
>>
>> Regards,
>> Jan
>
>
>
>
> ---------------------------------
> YAHOO! GROUPS LINKS
>
>
>    Visit your group "lpc2000" on the web.
>
>    To unsubscribe from this group, send an email to:
> lpc2000-unsubscribe@yahoogroups.com
>
>    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
> ---------------------------------
>
>
>
>
> ---------------------------------
> Yahoo! India Matrimony: Find your partner now.
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>